Can-Am ATV & UTV Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter · #1 ·
Hello everyone

My 2020 outlander max 1000 has a starting problem.It starts right a way but after a couple of seconds it stops.It does this 2or3 times and then it will run although very rough.After about a min it runs fine.It does this every time that the engine is cold.Brp has no answer.does anyone else have this problem or a idea what could be wrong.

Thanks
 

·
Registered
Joined
·
4,536 Posts
Are you using the correct fuel? in 2019 i believe they up'ed the octane requirement to 91 octane "may be higher in you area of NS' so it could be a detonation problem if your running 87. but it could be that when your pushing the start button your not fully depressing the start but and also not holding the hand brake of foot break in hard enough and long enough to get it going all the way. i only mention this because i had the same issue but once i started holding those in a second or 2 longer my starts got much better, just something to try. another thing you need in cold climates is a Battery Tender Jr, are you running one?
 

·
Registered
Joined
·
111 Posts
Discussion Starter · #3 ·
Thanks,I am running the correct fuel 91 octane, i do use a battery tender.I will try the brake idea and the start button.
 
1 - 3 of 3 Posts
Top