Beginner mechanical question - Renegade discussion - can-am ATV Forums - can-amtalk.com

Jump to content

 




 
 
 

Photo

Beginner mechanical question


  • Please log in to reply
4 replies to this topic

#1 Foxtrott4646

Foxtrott4646

    Newbie

  • Members
  • Pip
  • 4 posts
  • Your Ride:2020 Can-Am Renegade 850

Posted 17 November 2019 - 07:34 PM

I have a brand new can am 2020 renegade 850, and my question is, if i choose to run the same size tires on the front and the rear, would i need to regear the front diff? As im assuming its a different ratio than the rear since the front and the rear have different size tires from the factory on my model, my model has no extras except for the upgraded engine, any help is appreciated.

Sent from my SM-N960U using Tapatalk

#2 Dr Z

Dr Z

    Member

  • Members
  • PipPip
  • 18 posts
  • Gender:Male
  • Location:Colbert, WA
  • Your Ride:2011 Outlander XXC

Posted 17 November 2019 - 10:07 PM

If the diameter is the same as it usually is, you don't need to change anything. I run 26x9 on all four.


Dobeck AFR+, Hayden fan controller, QSC Rev-X primary/STM secondary, TORQ Locker
26x9 Kenda Bearclaw HTR on No Limit Octane custom wheels
Powermadd hand guards, RotopaX 4 gallon, Symtec heated grips, Homemade UHMW skid
Tatou 4S tracks with SpeedoHealer and Klim winter gear

My YouTube page
(mostly unedited track rides)


#3 Foxtrott4646

Foxtrott4646

    Newbie

  • Members
  • Pip
  • 4 posts
  • Your Ride:2020 Can-Am Renegade 850

Posted 05 December 2019 - 08:31 PM

If the diameter is the same as it usually is, you don't need to change anything. I run 26x9 on all four.

I believe mine has 24 inch tires in the rear and 21 inch tires in the front, and thats stock, but i know other models of the same year come with front and rear as the same size, im not sure if there are different internal components or if its technically an AWD type transmission

Sent from my SM-N960U using Tapatalk

#4 ozymax

ozymax

    Ozy for short.

  • Moderators
  • PipPipPip
  • 2856 posts
  • Gender:Male
  • Location:Cairns, Australia
  • Interests:Quad riding.
    Geocaching.
    Radio controlled helicopters.
    Hiking.
    4x4 touring this great country.
  • Your Ride:2012 G2 Outlander 650 Max XT

Posted 06 December 2019 - 09:46 PM

I think you need to recheck your figures.

According to the specs on that machine, you should have 25x8x12 on the front and 25x10x12 on the rear.

So diameters are the same, just the width is wider on the rears.

 

Attached File  Untitled.jpg   38.95KB   4 downloads



#5 Foxtrott4646

Foxtrott4646

    Newbie

  • Members
  • Pip
  • 4 posts
  • Your Ride:2020 Can-Am Renegade 850

Posted 28 January 2020 - 01:12 AM

I think you need to recheck your figures.
According to the specs on that machine, you should have 25x8x12 on the front and 25x10x12 on the rear.
So diameters are the same, just the width is wider on the rears.
 
attachicon.gifUntitled.jpg

I think youre right that was my bad

Sent from my SM-N960U using Tapatalk




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users