Can-Am ATV & UTV Forums banner

Brakes--Lever controls

1K views 3 replies 3 participants last post by  yamahabluebruin 
#1 ·
I'm messing with my G1 (2011 Rene XXC 800) this week and I was wondering if anyone has successfully swapped the brake lines at the levers? The left lever would control the fronts and the right would control the rear. I attempted it but initially the tubing bend will not accommodate it without some fabrication or so it appears. I figured I'd ask the panel of C.A.T experts first.

I want to make the change to better utilize the front braking for turning and have control of the throttle and a full hand hold on the right grip. I do not want to go with the Outlander single lever approach just yet as I would consider that a compromise without trying to make the swap work first.

Any insights would be appreciated. THANKS.
 
#3 ·
I would go to outlander set up and call it a day. One of the best things I've ever done.
jordan he's looking at doing this on his G1. is it just a master cylinder swap with lines and the single lever or will he need to relocate the breaks to the inboard ones?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top